Hilti HVAC Screws

When it comes down to selecting a HVAC college program, the first thing that you must find out is that the destination college you have selected has the necessary accreditations. We cannot stress this point highly enough, as it means that the training provided will be at least as good as specified by HVAC organizations.

The premier accrediting agency for HVAC training programs is the National Center for Construction Education and Research, the Partnership for Air-Conditioning, Heating, and Refrigeration, HVAC Excellence, North American Technician Excellence and Research, Environmental Protection Agency, and the Occupational Safety and Health Administration. You MUST select a college that has at least one accreditation.

It is also important to try and find small class numbers, which means you will receive one to one assistance from the instructors. A good HVAC college will also have an onsite science laboratory with professional-grade tools. Before enrolling make sure you visit and explore the campus and get a feel of the place, the instruction rooms, the facilities and talk to the teachers, if they are available. You should also find out whether there is any flexibility in scheduling classes for working students, and also how you might go about researching financial aid, if you might need it.

Screws specifically designed for HVAC applications, including the innovative Zip Screws to HASCC, consider using Hilti Kwik-Flex screws or Hilti Bi-Metal Kwik-Flex screws. Corrosion Resistance Typical ATM B117 Salt Spray Rating Typical Conditions

HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 23 05 29 – 3 Mechanical Systems steel screws, and concrete pier or steel support. 15. Copper Pipe Support: Hilti Corp. 3. 3M fire Protection Products.

I-HVAC-201 Revision 6/2012 InstallatIon GuIde 1. Expansive soils, such as those with high clay content can be improved by adding and • Drill tek-screws through the washer and bracket into pad to secure anchor eye. Do the same for the other side.

The standard ½” or full stamped return panel anchors the product category. Made of 18 gauge, galvanealed steel with powder coated, polyester paint, it has withstood the test of time and acceptability.

screws than to drill, tap and fasten or nut and bolt in the traditional manner. Screwdrivers: Best results are obtained with electric screw drivers (TEK Guns) of approximately 380 to 650 watt rating,

HVAC As a York distributor, our HVAC division offers the only complete line of heating and cooling products still manufactured in the U.S.A.. Fitting • Screws • Silicone • Solder

Or visit our website at plumbing-hvac.hdsupply.com Product Features • Size Range: 3 Screws Quantity Size No. 3

Hilti Fastening Systems. b. Illinois Tool Works, Inc. c (countersunk) screws and bolts for exposed Work unless otherwise specified. 3. Eyebolts: ASTM A 489. 4. Machine Bolts: ASME B18.5 or ASME B18.9 CO-ED DORMITORY HVAC MODIFICATIONS PHASES IIA & IIB The Fashion Institute of

Please discuss this with your HVAC contractor prior to installation. 2.3 DO NOT USE a Hilti® type 22 nailing gun. when using truss head screws no washers are required! Wood – No. 8 x 1 1/4” Truss Phillips Head Screw

Use No. 10 (M5) bolts or screws, 3/16 in. (5 mm) rivets, tack welds or spot welds as depicted in Figure 5 and Damper Installation Guide for HVAC Systems and in NFPA90A. If a breakaway style duct/sleeve connection • Hilti Corporation – FS-One • 3M® – #M-CP 25WB+

Mechanical, and HVAC applications Features Big Beam Clamp F519CT10NAEN_BOOK.indb 100 5/16/11 5:20:11 PM. Eliminates having to use loose screws • The combination washer-wing nut (Part No. 4WN) can be used to attach box (not included)

Pins and tool shall be same as manufactured by Hilti Fastening Systems; Impex Tool Corp.; Do not deliver or install finish carpentry work until HVAC system is Screws, Trim Head: Self-drilling,